> Technology > Checkout Equipment > Digital Cameras

Language Center Equipment:  Digital Cameras

Canon PowerShot S95

Camera Features

  • Easy to use, with a variety of shooting modes
  • Takes pictures in low light
  • Records to SD memory card
  • Uses Lithium-ion Battery Pack NB-6L
  • Also records 720p HD video with stereo sound!

Essential Instructions

Take a Picture Using Smart Auto Settings
  1. Turn on the camera.
    • Press the power button.
    • The start-up screen will appear.
  2. Chose AUTO mode.
    • Set the mode dial to AUTO.
    • When you point the camera toward the subject, the camera will make a slight noise as it determines the scene.
  3. Compose the shot.
    • Move the zoom lever to zoom in or out on your subject.
  4. Focus.
    • Press the shutter button halfway to focus.
    • The flash will pop up automatically when more light is needed.
    • When the camera has focused, it will beep twice.
  5. Shoot.
    • Press the shutter button fully to shoot.
    • The camera will shoot, with the flash firing automatically if needed.
    • The image will appear on the screen for about 2 seconds.
View Images in the Camera
  1. Enter Playback mode
    • Press the Right Arrow button.
    • The last image you took will appear.
  2. Choose an image.
    • Pressing ◀ or turning the dial counter-clockwise will cycle through images in the reverse order they were taken, from the newest image to the oldest.
    • Pressing ▶ or turning the dial clockwise will cycle through images in the order they were taken, from oldest to newest.
  3. The lens will retract after approximately 1 minute. If the flash has been raised, it will lower.
  4. Pressing the Right Arrow button again with the lens retracted will turn off the camera power.
Formatting SD Card
  1. Press the MENU button to display the Menu.
  2. Choose [Format].
    • Press the ◀▶ buttons to choose the TOOLS tab.
    • Press the ▲▼ buttons or turn the dial to choose [Format], the press the FUNC SET button.
  3. Choose [OK].
    • Press the ◀▶ buttons or turn the dial to choose [OK], then press the FUNC SET button.
  4. Format the memory card.
    • Press the ▲▼ buttons or turn the dial to choose [OK], then press the FUNC SET button.
    • The memory card will be formatted
  5. Complete Formatting.
    • When formatting ends, [Memory card formatting complete] will appear on the screen.
    • Press the FUNC SET button.

Learn more about the Canon PowerShot S95 Camera

 

Canon PowerShot SX260 HS

Camera Features

  • Easy to use, with a variety of shooting modes
  • Takes pictures in low light
  • Camera's GPS tracker records where photos are taken
  • Records to SD memory card
  • Uses Lithium-ion Battery Pack NB-6L
  • High-Speed Burst HQ allows for continuous capture (maximum of 10 frames) and Super Slow Motion movie records video at high speeds to allow playback in slow motion
  • Records 1080p Full HD video in stereo sound!

Essential Instructions

Take a Picture Using Smart Auto Settings
  1. Turn on the camera.
    • Press the power button.
    • The start-up screen will appear.
  2. Chose AUTO mode.
    • Set the mode dial to AUTO.
    • When you point the camera toward the subject, the camera will make a slight clicking noise as it determines the scene.
  3. Compose the shot.
    • Move the zoom lever to zoom in or out on your subject.
  4. Focus.
    • Press the shutter button halfway to focus.
    • The flash will pop up automatically when more light is needed.
    • When the camera has focused, it will beep twice.
  5. Shoot.
    • Press the shutter button fully to shoot.
    • The camera will shoot, with the flash firing automatically if needed.
    • The image will appear on the screen for about 2 seconds.
View Images in the Camera
  1. Enter Playback mode
    • Press the Right Arrow button.
    • The last image you took will appear.
  2. Choose an image.
    • Pressing ◀ or turning the dial counter-clockwise will cycle through images in the reverse order they were taken, from the newest image to the oldest.
    • Pressing ▶ or turning the dial clockwise will cycle through images in the order they were taken, from oldest to newest.
Formatting SD Card
  1. Press the MENU button to display the Menu.
  2. Choose [Format].
    • Press the ◀▶ buttons to choose the TOOLS tab.
    • Press the ▲▼ buttons or turn the dial to choose [Format], the press the FUNC SET button.
  3. Choose [OK].
    • Press the ◀▶ buttons or turn the dial to choose [OK], then press the FUNC SET button.
  4. Format the memory card.
    • Press the ▲▼ buttons or turn the dial to choose [OK], then press the FUNC SET button.
    • The memory card will be formatted
  5. Complete Formatting.
    • When formatting ends, [Memory card formatting complete] will appear on the screen.
    • Press the FUNC SET button.

Learn more about the Canon PowerShot SX260 HS Camera